Geovision GV-Wiegand Capture Interface Box

Brand:
Part Number: GV-WIEGAND
Write a Review
Replacement: There is no direct replacement. Ask a representative.
Discontinued
$29.00
Technical Support Technical Support
  • Access Control Type : Other

Customers Also Viewed

Description

Geovision GV-Wiegand Capture Box

Geovision GV-Wiegand Capture is a box device that can integrate your current Wiegand access control system into DVR systems manufactured by GeoVision. Through the GV-Wiegand Capture, the photo identification and text data from the access control can be easily combined on the video data from DVR. Geovision GV-Wiegand Capture is ideal for access control, time and attendance, or authorized access management where video data is required. Security can use the higher security level of the combined video data for live monitoring during busy hours, and for recording during off-peak hours.

Key Features:

  • Communication RS-232: DB9 female
  • Communication RS-485: Terminal Block
  • 2 inputs
  • Inputs signal 12VDC/Dry connect input
  • Input High State: 9~12VDC/Close
  • Input Low State: 0V/open
  • 2 Outputs
  • Output Relay Status: Normal open
  • Output Relay Capacitance 3Amp/125VAC, 1.5Amp/250VAC
  • Output Relay on time: 4ms
  • Output Relay off time: 4ms
  • Weigand input connector: 12VDC, D0, D1, GND
  • Weigand output connector: 12VDC, D0, D1, GND
  • Weigand Format: Wiegand 26~40Bits
  • POWER;; 12VDC
  • Enviromental Conditions Operating Temp: 0°;C~55°;C
  • Enviromental Conditions Humidity: 5%~95% (Non-Condensing)
  • 120 (w) x 68 (H) x 26 (D) mm
View AllClose

Additional Information

Access Control Type:
Other
View AllClose

Customers Also Viewed