Ubiquiti POE-48-24W-WH 48V 0.5A 24W PoE Injector, White

Ubiquiti POE-48-24W-WH 48V 0.5A 24W PoE Injector, White

The Ubiquiti POE-48-24W-WH is a grounded 48V Power over Ethernet injector that delivers up to 24 W to a single PoE-powered device over a standard Ethernet cable. It accepts a wired LAN feed on the input port and combines power and data on the PoE output port, allowing installers to drop a single cable to an access point, IP camera, or other Ubiquiti PoE device without running a separate power line. The white enclosure is designed for indoor placement at the edge of a network, near the device it powers, and ships with an AC cable that includes earth grounding.

This injector is part of the wider Ubiquiti PoE Adapter family and is compatible with most Ubiquiti PoE products that operate at 48V, including airFiber, airMAX, EdgeMAX, mFi, UniFi AP, UniFi Protect, UniFi LED, and UFiber devices. Beyond delivering clean DC power, the unit provides multi-mode surge protection, clamping at 11V on data and 60V on power, peak pulse current handling on the data line, and ESD drain when paired with grounded TOUGHCable runs. Operating from a wide 100-240V AC input, it supports global deployments and runs in environments from 0 to 40°C.

Key Features:

• 48V DC @ 0.5A output, 24 W maximum; matches the power requirements of most 48V Ubiquiti devices without overprovisioning.
• One LAN input port and one PoE output port; keeps the wiring path simple from the switch to the powered device.
• 100 Mbps maximum data transfer rate; suitable for the many edge devices that do not require gigabit throughput.
• LED indication; gives installers a quick visual confirmation that the injector is powered and operating.
• Wide 100-240V AC input at 50/60 Hz; deploys in U.S., European, and other electrical environments without a different SKU.
• Difference and common-mode surge protection with 1500A max surge discharge; helps shield connected devices from line-borne transients.
• 11V data / 60V power clamping with 36A peak pulse current on the data line; protects against fast voltage spikes on Ethernet pairs.
• AC cable with earth ground and ESD drain when paired with TOUGHCable; reduces outdoor device failures caused by electrostatic discharge.
• Compatible with airFiber, airMAX, EdgeMAX, mFi, UniFi AP, UniFi Protect, UniFi LED, and UFiber 48V devices; standardizes power delivery across a Ubiquiti deployment.
• 0 to 40°C operating temperature, 5 to 90% non-condensing humidity; reliable in conditioned indoor environments.
• CE, FCC, IC, and UL certified; meets the regulatory requirements for North American and EU installations.