Altronix AL176X220 Access Control Power Supply Charger - Single PTC Class 2 Output
Altronix AL176X220 is a single output Power Supply/Charger that converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a PTC protected 12VDC or 24VDC output.
Key Features:
Input
Input 220VAC (working range 198VAC - 256VAC), 50/60Hz, 0.3A.
Output
- 12VDC or 24VDC selectable output.
- 1.75A supply current.
- PTC protected output, rated @ 2.5A.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
Supervision
- AC fail supervision (form "C" contacts).
- Low battery supervision (form "C" contacts).
Temperature
- Operating 0ºC to 49ºC (32ºF to 120ºF).
- Storage - 20ºC to 70ºC ( - 4ºF to 158ºF).
- Relative Humidity 85% +/- 5%.
BTU/Hr. (approx.):
- 12VDC: 11 BTU/Hr.
- 24VDC: 22 BTU/Hr.
- System AC input VA requirement: 66VA.
