Altronix NETWAY1EV Single Port PoE Injector

Altronix NETWAY1EV Single Port PoE Injector

Altronix NetWay1E / NetWay1EV is an enhanced 10/100/1000Base-T PoE midspan power injector. It is fully compliant and backwards compatible with PoE (15W) and PoE+ (30W) devices. NetWay1E / NetWay1EV is also capable of sourcing up to 85W with devices incorporating LTPoE++™ 70W, 52.7W & 38.7W, requiring up to 70W of power at up to 100m.

Key Features Of Altronix NETWAY1EV

• Input

  • 230VAC, 50/60Hz, 0.8A.

• Output

  • IEEE 802.3af (15W) & IEEE 802.3at (30W) compliant.
  • Supports LTPoE++™ 70W, 52.7W & 38.7W PD compliant devices up to 100m.
  • Integral short circuit and overload protection.

• Ethernet

  • Connectivity: RJ45, auto-crossover.
  • Wire type: 4-pair CAT5e or higher structured cable.
  • Distance: up to 100m.
  • Speed: 10/100/1000 BaseT, half/full duplex, auto negotiation.

• Indicators (LED)

  • Red LED: PoE ON.
  • Red LED: Power ON.
  • Yellow and Green LED (by RJ45 jack):
  • IP Link status, 10/100Base-T/active.

• Temperature

  • Operating:

    • 85W: - 20° C to 49° C ( - 4° F to 120° F).
    • 55W: - 20° C to 55° C ( - 4° F to 131° F).

  • Storage:

    • - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.): 32 BTU/Hr.
  • System AC input VA requirement: 172.5VA.

• Operating Altitude

  • - 304.8m to 609.6m ( - 1,000ft. to 2,000ft.).