Altronix PDS8CBK1 Kit

Altronix PDS8CBK1 Kit

Kit includes: VR6 Voltage Regulator and PDS8CB Power Distribution

Altronix VR6 Voltage Regulator converts a 24VDC input into a regulated 5VDC or 12VDC selectable output at up to 6A supply curent. It reduces the cost of adding an additonal power supply to achieve 24VDC and 12VDC or 5VDC simultaneously. / Altronix PDS8CB dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources. This power is distributed over a total of eight (8) PTC protected outputs.

Key Features:

• VR6

  • Power Input / Output:

    • Input: 24VDC @ 1.75A – Output: 5VDC @ 6A.
    • Input: 24VDC @ 3.5A – Output: 12VDC @ 6A.

  • Output:

    • 5VDC or 12VDC regulated output.
    • Output rating 6A max. non power-limited.
    • Surge suppression.

  • LED Indicators:

    • Input and output LEDs.

  • BTU/Hr (approx.):

    • 5VDC: 15 BTU/Hr.
    • 12VDC: 37 BTU/Hr.

• PDS8CB

  • Power Input 1 and Input 2 Voltage Range:

    • 5VDC to 24VDC up to 9A each or 16VAC to 28VAC up to 9A each.

  • Outputs:

    • Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2.
    • Individual outputs may be set to OFF position for servicing.
    • PTC protected outputs rated @ 2A. (total output current should not exceed max current rating of power supply employed).
    • Surge suppression.

  • LED Indicators:

    • Eight (8) individual output LEDs.

• Temperature

  • VR6, PDS8CB

    • Operating Temperature 0ºC to 49ºC (32ºF to 120ºF).
    • Storage Temperature - 20ºC to 70ºC ( - 4ºF to 158ºF).
    • Relative Humidity 85% +/- 5%.