Bosch C900V2 Conettix Dialer Capture Ethernet Module

Bosch C900V2 Conettix Dialer Capture Ethernet Module

The Conettix C900V2 Dialer Capture Ethernet Module (referred to as the C900V2) links the digital dialer (data output) from a control panel to an Ethernet connection on a local area network (LAN) or wide area network (WAN).

When the dialer sends a message, the C900V2 simulates a public switched telephone network (PSTN) connection to the central station. The C900V2 decodes the digital dialer message and sends the decoded signals by Ethernet connection to the Conettix D6600 or D6100i. Communication Gateway/Receiver (referred to as the receiver). When the receiver acknowledges receipt of the message, the C900V2 sends an acknowledge message to the dialer. This process maintains true end-to-end security.

The C900V2 has three modular connectors:

• TELCO connects to the PSTN.
• PANEL connects to a digital dialer.
• Ethernet connects to the network.

In Intercept Mode, the C900V2 connects the digital dialer to a LAN or WAN. In Fallback Mode, the C900V2 connects the dialer to the PSTN, which bypasses the C900V2 from the phone circuit. The C900V2 stays in Intercept Mode when its CPU is working (Output 1 open). In Fallback Mode, the C900V2 connects the dialer directly to the PSTN. The C900V2 switches to Fallback Mode if there is a CPU or network failure.