Pelco IMP521-1ES 5MP Outdoor Dome IP Security Camera with Motorized Lens
Powerful, versatile, and affordable, the Sarix ® Professional (P) range cameras pack the most popular features and functionality of Sarix technology into a wide range of indoor and outdoor options, including bullet cameras and mini domes. There are also indoor-only options such as a vandal resistant wedge and micro dome. Mix and match the performance options and form factor you need for almost any lighting condition, environment, and application.
Within the Sarix Professional range, the Sarix IMP Series mini dome cameras feature a remote zoom lens for wide angle or long range surveillance needs. Autofocus capability ensures the camera can be automatically refocused when needed. Additionally, the Sarix IMP Series features advanced color science and a mechanical IR cut filter for increased sensitivity in low-light installations.
Sarix Professional range cameras support up to two simultaneous video streams and a third service stream. The two streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and variable bit rates to optimize image quality with bandwidth and storage efficiency.
Key Features:
- Up to 5 megapixel (MPx) resolution
- Up to 30 images per second (ips) at 3 MPx
- Autofocus motorized remote zoom lens
- Operating temperature up to 60°C (140°F)
- Up to 256 GB edge storage with Micro SD card
- Motion detection and camera sabotage detection
- Power over Ethernet (PoE+) Class 4, 24 VAC (environmental models),
- Pelco Smart Compression Technology
- All models vandal resistant to IK10
- Compatible with Pelco and third-party video systems
- ONVIF Profile S, Profile G, and Profile Q conformant
- Full 3-year warranty and support
- Aluminum body and trim ring; polycarbonate bubble
- RAL 7047
- IP66 Ingress Protection
- Type 4X
- NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
- 1/1.8" CMOS
- Built-in Varifocal motorized Lens
- 3 ~ 10.5 mm, FOV: 88°~ 37°
Edge Storage
Sarix Professional range cameras feature onboard edge storage with a micro SD card. Video clips of varying lengths can be stored to the card upon alarm, or video can be written continuously to the SD card in the case of network outage. Video can be retrieved from the card through the FTP protocol or by using an ONVIF Profile G enabled client. Sarix Professional range cameras feature a simple motion detection algorithm that allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned.
Open and Integrated
Sarix Professional range cameras seamlessly connect to Pelco video management systems such as VideoXpert ™ , Endura ® version 2.0 (or later), and Digital Sentry ® version 7.3 (or later). Sarix Professional range cameras integrate with major third-party systems through the open Pelco API or the ONVIF Profile S, Profile G, and Profile Q standards.
Standard Web Interface
Pelco cameras use a standard Web browser interface for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming.
PELCO’S SMART COMPRESSION TECHNOLOGY
Pelco’s Smart Compression Technology lowers bandwidth and storage requirements by up to 70%. Our technology allows the user to make intelligent decisions regarding storage savings and image quality. Pelco’s Smart Compression Technology dynamically analyzes motion occurring within live video in real-time, to intelligently compress the information you don’t need, while retaining details with clear quality in the areas that are important in the scene. By enabling Dynamic GOP, an added feature of Smart Compression, the number of I-frames are automatically reduced in scenes with low motion. Based on the complexity of scenes and motion occurring, such as a store room that has limited entry and exit, up to 70% bandwidth savings can be achieved.
Optional Accessories:
- IMPICM-1I In-ceiling mount, for use with the indoor models
- IMPICM-1ER In-ceiling mount, for use with the environmental models
- IMPPM-1I Pendant adapter, for indoor models
- IMPPM-1ER Pendant adapter, for environmental models
- IMPPMB-1I Wall mount bracket for indoor models
- WMVE-SR Wall mount arm, 1.5 in. NPT, outdoor, RAL 7047
- WMVE-SW Wall mount arm, 1.5 in. NPT, indoor, RAL 9003
- IMPEBAP 4S electrical box adapter
- IMPLD2-0I Smoked lower dome (indoor)
- IMPLD2-0ER Smoked lower dome (environmental)
- IMPLD2-1I Clear lower dome (indoor)
- IMPLD2-1ER Clear lower dome (environmental)